Basic2
Lab table
The “BASIC” laboratory table is made for customers who want to work with high quality products
The base has a frame construction, with powder painting pastel-blue (RAL 5024) and can be levelled using stainless steel adjusting screws. Such screws are especially useful for a sterile IVF-environment. The polished work plate is made of high-grade stainless steel on which a special ground
finish identifies the electric warming area. The electric components, such as the temperature controller with digital display, timer and the main switch are placed in a user-friendly power and media supply channel at the rear of the working-area. Two sockets plus a CO2-flowmeter are built into the media supply channel where they are easy to operate and readily visible. The stainless steel plate is prepared for mounting a stereomicroscope with light transmitted at height of 60 mm. This is either provided by customer or can be supplied by customers requirements. Plus: a new electrical heating system, with a temperature
difference of +/- 0,2°C maximum! The light-transmitter of the stereomicroscope is built into the work plate at absolute level, a glass-pane of 60 mm diameter can be aligned quite easily via adjusting screws.
etc. (for more details please contact us!).
finish identifies the electric warming area. The electric components, such as the temperature controller with digital display, timer and the main switch are placed in a user-friendly power and media supply channel at the rear of the working-area. Two sockets plus a CO2-flowmeter are built into the media supply channel where they are easy to operate and readily visible. The stainless steel plate is prepared for mounting a stereomicroscope with light transmitted at height of 60 mm. This is either provided by customer or can be supplied by customers requirements. Plus: a new electrical heating system, with a temperature
difference of +/- 0,2°C maximum! The light-transmitter of the stereomicroscope is built into the work plate at absolute level, a glass-pane of 60 mm diameter can be aligned quite easily via adjusting screws.
Advantages
- Easy handling
- Made completely from stainless steel
- Electrical warming area
- With a temperature difference of +/- 0,2°C maximum.
Technical Data
- Size (warming area)
- Length 700 mm
- Depth 400 mm
- Work temperature RT +5°C to +50°C
- Power 1/PE AC, 230V 50Hz, 65VA (Other voltage on request)
Specifications Order assigned
B 05-121 / Basic2 - 121 Lab-table solo- one microscope place & one electrical warming area
- Size (exterior, WxDxH) 1200 x 800 x 950 mm
- Working height ca. 780 mm, Working depht ca. 640 mm
- Weight 94 kilograms
- one microscope place & one electrical warming area
- Size (exterior, WxDxH) 1500 x 800 x 950 mm
- Working height ca. 780 mm, Working depht ca. 640 mm
- Weight 113 kilograms
- one microscope place & one electrical warming area
- Size (exterior, WxDxH) 1800 x 800 x 950 mm
- Working height ca. 780 mm, Working depht ca. 640 mm
- Weight 129 kilograms
- one microscope place & two electrical warming area
- Size (exterior, WxDxH) 1800 x 800 x 950 mm
- Working height ca. 780 mm, Working depht ca. 640 mm
- Weight 149 kilograms
- two microscope place & two electrical warming area
- Size (exterior, WxDxH) 1800 x 800 x 950 mm
- Working height ca. 780 mm, Working depht ca. 640 mm
- Weight 149 kilograms
etc. (for more details please contact us!).
