Workbenches with Vertical flow air system
Vertical air circulation: Laminar flow is a gentle current of highly pure filtered air with even speed. This air is led total surface vertically by the PURE work space. It displaces the impure spatial air and exhausts all impurities from the working process reliably. A part is led back over the suction slot at the rear table edge, the remainder flows into the area. From the return airduct and the area air over prescreeners is sucked in by a noiseless radial fan. Entire air is promoted to the distributor chamber and pressed by HEPA filter (High Efficiency Particulate air filter). The cycle begins again.
Avantgarde2
This is a second generation workbench with vertical air-channelling. This new model is characterised by a hands-on and visually current design. Several elaborate technical enhancements could be realised. This type of construction permits ample working width and depth. The new electronic-system allows a two-stage ventilation so that the operator can adjust his own speed which might vary from lab to lab. This is operated via a tough membrane-keypad. The PVC-front pane has cut-outs for the microscope to be able to use the wide- ranging adjustments without any restrictions. The workbench is all stainless steel. The base has a frame construction, with powder painting pastel-blue (RAL 5024) and can be levelled using stainless steel adjusting screws. The colour of the body is (RAL 9016), traffic white. Such screws are especially useful for a sterile IVF-
environment. The polished work plate is made of high-grade stainless steel on which a special ground finish identifies the electric warming area. For the warming plate we use a new electrical heating system, with a temperature difference of +/- 0,2°C maximum. The light-transmitter of the stereomicroscope is built into the stainless steel work plate at absolute level, a glass- pane of 60 mm diameter can be aligned quite easily via adjusting screws. The back of the working-space is made of stainless steel, too, in which electrical components such as temperature control with digital display, switches, CO2-flowmeter are inserted for a user-friendly use. Optional CO2-mini-incubators, monitors or cuts-outs with sluices are available, too. The large side windows are made from safety-glass which creates a visually friendly working environment. The colour of the body is (RAL 9016), traffic white.
Available variants of this model:
Flow V
This is a new generation vertical workbench Flow V. This new model is characterized by a hands-on and visually current design. Several elaborate technical enhancements could be realized. This model is with a front window, for safe working with the microscope and the product. This type of construction permits ample working width and depth.
Available variants of this model: